1、通过SecureCRT的方式SSH登录到VMX路由器，在登录路由器之前，需要开启SSH服务、及配置接口的IP地址服务。如下所示：[edit]root@JNCIP-Lab# show system services | display setset system services ftpset system services sshset system services telnet connection-limit 5[edit]root@JNCIP-Lab# show interfaces | display setset interfaces ge-0/0/0 unit 0 family inet address 192.168.136.15/24记得通过VmwareWorkstation的虚拟网卡关联到VMX的网卡。
2、从电脑端测试Ping，是否可以到达VMX路由器：
3、打开SecureCRT登录界面，登录到VMX路由器
4、使用Root帐号登录时，显示的是%层次，如下所示：root@JNCIP-Lab%root@JNCIP-Lab%进入到配置模式：root@JNCIP-Lab> configureEntering configuration mode[edit]root@JNCIP-Lab#
5、配置两个逻辑系统r1和r2，在配置以下配置之前，需要在全局的启用两个接口ge-0/0/1, ge-0/0/2的vlan-taggingroot@JNCIP-Lab# show interfaces | display setset interfaces ge-0/0/0 unit 0 family inet address 192.168.136.15/24set interfaces ge-0/0/1 vlan-taggingset interfaces ge-0/0/2 vlan-tagging同时，虚拟网卡的在Vmware Workstation也需要绑定到同一个虚拟网卡：root@JNCIP-Lab# show logical-systems r1 | display setset logical-systems r1 interfaces ge-0/0/1 unit 12 description r2ge-0/0/2.12set logical-systems r1 interfaces ge-0/0/1 unit 12 vlan-id 12set logical-systems r1 interfaces ge-0/0/1 unit 12 family inet address 10.0.4.5/30[edit]root@JNCIP-Lab# show logical-systems r2 | display set set logical-systems r2 interfaces ge-0/0/2 unit 12 description r1ge-0/0/1.12set logical-systems r2 interfaces ge-0/0/2 unit 12 vlan-id 12set logical-systems r2 interfaces ge-0/0/2 unit 12 family inet address 10.0.4.6/30
6、现在单独的登录到r1和r2进行Ping的测试：root@JNCIP-Lab% cliroot@JNCIP-Lab> set cli logical-system r1Logical system: r1root@JNCIP-Lab:r1>root@JNCIP-Lab% cliroot@JNCIP-Lab> set cli logical-system r2Logical system: r2root@JNCIP-Lab:r2>root@JNCIP-Lab:r1> ping 10.0.4.6 count 5 rapidPING 10.0.4.6 (10.0.4.6): 56 data bytes!!!!!--- 10.0.4.6 ping statistics ---5 packets transmitted, 5 packets received, 0% packet lossround-trip min/avg/max/stddev = 2.404/4.491/6.835/1.473 msroot@JNCIP-Lab:r2> show arpMAC Address Address Name Interface Flags00:05:86:71:a9:03 10.0.4.1 10.0.4.1 ge-0/0/2.23 none00:05:86:71:a9:01 10.0.4.5 10.0.4.5 ge-0/0/2.12 none